Latah Aux Comm Mesh Net
MeshCore
Reliable routes from Moscow Mountain to the Camas Prairie.
Live in development at Genesee. Settings below are the upstream US recommendation.
MeshCore uses dedicated repeaters and managed routes rather than flooding from every node, scaling well for community networks.
Best for: Reliable, scalable messaging through managed repeaters.
- 1
- Sites live
- 0
- Planned
- —
- Nodes (24h)
- —
- Messages (24h)
How it works
- •Repeaters form the backbone and learn routes, rather than every node rebroadcasting everything.
- •Companion devices connect to your phone and talk through nearby repeaters.
- •Routed paths use less airtime, so the network scales further than flooding does.
Radio (LoRa)
All settings →- Preset
- USA/Canada (Recommended)
- Frequency
- 910.525 MHz
- Bandwidth
- 62.5 kHz
- Spreading factor
- 7
- Coding rate
- 5
Get on MeshCore in four steps
- 1
Get a radio
Pick a MeshCore-supported LoRa board. Use the same board family as our repeaters if you want to run one.
See gear → - 2
Flash firmware
Install the Companion firmware for a handheld, or Repeater firmware for a fixed site.
Open web flasher → - 3
Configure
Apply the US radio settings, or choose the USA/Canada preset in the app.
See settings → - 4
Join in
Add the Genesee repeater and introduce yourself. It is live but still in development, so coverage may be spotty.
See sites →